Product Search

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Continue Browsing

Teradek Bolt 3000 Kit

With a redesigned chassis, the Bolt Pro 3000 Kit 3G-SDI/HDMI Transmitter and Receiver from Teradek is a reliable and capable monitoring solution. This set includes metadata and timecode support, 3D LUTs, USB 3.0 GRAB Engine. Along with dual inputs/outputs, is multicast capable, and offers manual frequency selection.

Transmitting across the 5 GHz frequency range, the pair utilizes Dynamic Frequency Selection (DFS) to find a clean signal between the transmitter and receiver. This is desirable when working in areas with crowded frequencies. The transmitter and receiver are equipped with SDI ports, and the transmitter features a loop-through SDI output. The USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. The included waterproof case with custom-cut foam carries the components during transport and storage.

Teradek Bolt 3000 Kit Transmitter Specs

Video Inputs – 1 x SDI, BNC (75 Ohms)
Video Output – 1 x SDI, BNC (75 Ohms)
Channels – 20 MHz DFS Channels: 24 (200 MHz channels cannot utilize interlaced, PsF, or 1080p 60/50), 40 MHz DFS Channels: 11 (USA)

Delay – <0.001 sec (when no video format conversion is enabled)
Color Sampling – RGB 4:4:4 (HDMI out, 8-bit color), YCbCr: 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v1.1.0 or later)
Formats – 1920 x 1080p 60/59.94/50/30/29.97/25/24/23.98, 1920 x 1080PsF 30/29.97/25/24/23.98, 1920 x 1080i 60/59.94/50, 1280 x 720p 60/59.94/50, 576i/480i, NTSC/PAL
Wireless – Range: Up to 3000′ / 914 m, line-of-sight, Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz (US) / 5.19 to 5.23 GHz (EU & JP), DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz (US) / 5.27 to 5.67 GHz (EU & JP)
RF Power – 22 dBm EIRP (with two 5 dBi TX antennas)
Noise Rejection – Can coexist with Wi-Fi and 5 GHz cordless phones
Audio – 48 kHz, 24-bit PCM
Mounting – 1/4″-20 threaded mounting holes
Power – Volts: 7 to 28 VDC, Consumption: 7.5 W, Connector: 2-pin LEMO
Dimensions – 0.9 x 2.6 x 4.0″ / 2.4 x 6.6 x 10.2 cm
Weight – 8 oz / 226.8 g

 

 

NOTE: Prices quoted are estimated per day unless otherwise noted, and are subject to availability, the exact rental period, and other factors. Please request a formal quote to get an exact price.

Additional Information

You can also mix and match SDI & HDMI receiver units, up to a total of 4.

Available with either V-lock plate, Canon LP-E6 Battery Plate power, or D-Tap power.

Add the new Teradek Bolt Sidekick II receiver to monitor multiple devices at once, only $100/day

Add the new Teradek Bolt Receiver Antenna Array for signal range boosting, only $50/day

0
    Your Gear List
    Your Gear List is emptyReturn to Our Gear